Rh-FA800d 4-Guardrail Transfer Patient Trolley Hospital Equipment

 






Specification

♦ Guardrail
  Adopts a new type of safety guardrail design. The buckle of the guardrail is fixed by a 9mm thick lock, better and safer

♦ Drainage bag hole
  The corners of each of the four guardrails have small holes for hanging drainage bags.

♦ Casters
  Double-sided anti-winding casters with central lock, prevent hair and other sundries from entering the casters and causing implementation failures.
  Internal steel brackets, double-bearing cylindrical structure, large load capacity, strong anti-collision an anti-side force effects, There are four casters
  with a diameter of 150mm. The four corners of the cart are equipped with a caster control system. One foot brakes and the four wheels are fixed at
  the same time.

♦ Central Brake
  The central control brake linkage rod is formed by an integrated round tube to ensure higher strength.

♦ Fifth steering wheel
  Independent central fifth wheel system: the fifth wheel control pedals are installed on both sides of the cart, and the central fifth wheel can move
  freely when it is retracted;

♦ Tray
  There is a two-stage injection-molded tray under the bed. The tray is divided into two parts with different sizes and depths. It is equipped with 6
  leaking holes and is easy to use. The tray can bear 10Kg.

♦ Infusion stand rack
  There is an infusion stand storage rack at the bottom of the back plate, which can be fixed and stored when not in use, and there is a plastic sleeve
  in the infusion stand storage rack to prevent the infusion stand from colliding and shaking.

♦ Oxygen bottle rack
  An oxygen bottle of up to 7 liters can be placed horizontally on the underside of the bed, and there are two knobs to fix it.

♦ Mattress
  The surface of the fabric is waterproof and easy to clean. The outer fabric can be washed with water; the thickness of 5 cm allows the patient to lie
  down more comfortably during gastrointestinal endoscopy.

♦ Stainless steel hooks
  There are four stainless steel metal hooks on the side of the bed, which are fixed with stainless steel rivets, which are stronger and more beautiful.

♦ Structure
  The frame of the bed body is welded vertically by a U-shaped square tube of 30*60*1.5mm, with better strength and stable implementation.