Rh-FA800E 5 Folding Railings Transfer Patient Trolley Hospital Equipment

RH-FA800E 5 Folding Railings Transfer Patient Trolley




Description

1. Casters: Double-sided anti-winding casters with central lock, prevent hair and other sundries from entering the casters and
   causing implementation failures. The internal steel bracket, double-bearing cylindrical structure, large load capacity, strong anti-
   collision and anti-side force effect, four There are two casters with a diameter of 150mm. The four corners of the cart are
   equipped with a caster control system. One foot brakes and the four wheels are fixed at the same time.
2. The central control brake linkage rod is formed by an integrated round tube to ensure higher strength.
3. Independent central fifth wheel system: control pedals are installed on both sides of the cart, and the central fifth wheel can
   move freely when retracted;
4. Pallet: There is a two-stage pallet made by injection molding under the bed. The pallet is divided into two parts of different sizes
   and depths. There are 6 leaking holes, which are easy to use. The pallet can bear 10Kg.
5. Infusion stand storage rack, the lower part of the back panel is equipped with infusion stand storage rack, which can be fixed
   and stored when not in use, and there is a plastic sleeve in the infusion stand storage rack to prevent the infusion stand from
   colliding and shaking.
6. Oxygen bottle rack: An oxygen bottle of up to 7 liters can be placed horizontally on the underside of the bed board, and there
   are two knobs to fix it to prevent the oxygen bottle from shaking.
7. Thicker mattress: The surface of the fabric is water-resistant and easy to clean. The outer fabric can be washed with water. It is
   more comfortable for the patient to lie down with a thickness of 5cm.
8. There are four stainless steel metal hooks on the side of the bed, which are riveted and fixed with stainless steel rivets for better
   strength and more beautiful appearance.
9. The frame of the bed body is welded vertically by a U-shaped square tube of 30*60*1.5mm, with better strength and stable
   implementation.
10. Infusion stand socket: There are infusion stand sockets around the bed, which can be rotated to place the infusion stand when
     in use, and can be rotated and stored under the bed when not in use. There is a plastic sleeve in the infusion stand socket to
     prevent collisions. Beautiful and easy to use.


Specification

Dimension:1930*730*510-850mm
Backrest upward tilting: 0-70°
Load Capacity: 170 kg
The back lift is controlled by a silent gas spring
Main board: PE resin molding produced
Structure frame: metalic material welding made
Guardrail: PE resin molding products for both side; Height over 390mm, effective protecting range over 255mm

Showcase